Running Mail
83
3
Thickness setting:
There is a thin/thick mail latch under the top cover of the feeder.
For normal operation, the lever will be to the left. However, for
processing a batch of thick mail, move the lever to the right, es-
pecially if the thicker envelopes won't feed into the mail path.
1 Open the feeder cover.
2
Change the lever po-
sition:
- left: for normal
- right: for special
thickness.
3 Close the feeder cover.
Return the lever to the normal position (left) after processing a
batch of thicker mail. This will prevent normal mail from double or
multi-feeding.
OMEGA1_US.book Page 83 Vendredi, 1. octobre 2010 10:46 10
To Next Page
Loading...
