Trainee Guide TR-L2-M2000
Level 2 Maintenance Training - M2000 Dispensing Systems 2-2-68 P/N 73-0018-00 (Revision B)
Exercise Sheet 2-9-1
Needle Sensor Configuration
1. Start FmNT.
2. In the Main Window, click on Configuration.
3. Select Machine Offsets from the Configuration menu.
4. Select Machine Offsets Parameters from the drop-down menu.
5. The Machine Offsets Parameters dialog box opens.
6. Click on the arrow next to the Sensor Type text box to view all available
configuration options.
7. Select the appropriate Needle Sensor type for your system.
8. Click on OK.
To Next Page
Loading...
