Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 2-2-11 P/N 73-0018-00 (Revision B)
Outline Sheet 2-3-1
Pneumatic Distribution
A. Introduction
The M-2000 Series Equipment uses compressed air at up to 120 psi of pressure for the
conveyor stop pins and clamp bars, vacuum generator, dispense valve, syringe cooler and
needle heater.
B. Enabling Objective
2.3 Understand the M-2000 pneumatic system and the procedure to adjust the air
pressure on all pressure regulators on the M-2000 Series platform.
C. Topic Outline
1. Introduction
2. Overview
Main Air Gauge and Regulator
Valve Pressure
Fluid Pressure
Tooling Pressure
Cooling Pressure
Tensioner Pressure
3. Summary and Review
To Next Page
Loading...
