Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 4-2-59 P/N 73-0018-00 (Revision B)
Outline Sheet 4-14-1
Reinitializing Conveyor Controller Memory
A. Introduction
The Conveyor Controller Module contains operating instructions that control various
aspects of the dispensing system’s major components. If the memory is erased, it will
need to be reinitialized.
B. Enabling Objective
4.14 Understand the procedure to reinitialize memory and download the conveyor
atom.
C. Topic Outline
1. Introduction
2. Overview
Conveyor Atom
Reinitializing Conveyor Controller Memory
3. Summary and Review
To Next Page
Loading...
