Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 3-2-52 P/N 73-0018-00 (Revision B)
Information Sheet 3-8-1
Conveyor Belts
A. Conveyor Belt Maintenance
1. To maintain optimum system performance, it is recommended that you change the
conveyor belts every six months.
2. Belts may need to be changed more frequently or less frequently, depending upon the
volume of part handling.
3. Belts should be replaced if they are cracked, worn or broken.
B. Cleaning the Belts
1. Clear the dispensing area of all boards and parts.
2. Wipe the length of each conveyor belt, using isopropyl alcohol and a soft cloth.
3. Make sure that spilled, dried, or wet fluid on the rails is removed.
To Next Page
Loading...
Need help?
General