Trainee Guide TR-L2-M2000
Level 2 Maintenance Training - M2000 Dispensing Systems 3-2-3 P/N 73-0018-00 (Revision B)
Outline Sheet 3-2-1
Purge Boot and Weigh Station
A. Introduction
The plastic cups in the Purge Boot and Weigh Station should be replaced on a daily basis.
In addition the purge boot must be cleaned and the banjo wipe replaced.
B. Enabling Objective
3.2 Identify the procedure to replace the Purge and Weigh Station cups, Banjo Wipe
and Purge Boot.
C. Topic Outline
1. Introduction
2. Overview
Disposables
Tools and Materials Needed
3. Summary and Review
To Next Page
Loading...
