Trainee Guide TR-L2-M2000
Level 2 Maintenance Training - M2000 Dispensing Systems 2-2-75 P/N 73-0018-00 (Revision B)
Outline Sheet 2-10-1
Needle Heater
A. Introduction
The Needle Heater consists of a temperature controller and a heating element that
attaches to the dispensing needle. On M-2000 Dispensing Systems equipped with
heaters, the temperature controller is an integrated feature. The heating element plugs
into outlets on the dispensing head and the temperature is controlled through the FmNT
software.
B. Enabling Objective
2.10 Setup and adjust the needle heater.
C. Topic Outline
1. Introduction
2. Overview
Heating Element Compatibility
Temperature Controllers
Theory of Operation
3. Summary and Review
To Next Page
Loading...
