Trainee Guide TR-L2-M2000
Level 2 Maintenance Training - M2000 Dispensing Systems 2-2-97 P/N 73-0018-00 (Revision B)
Outline Sheet 2-13-1
Board Sensors
A. Introduction
Board sensors are sensors located along the length of the conveyor rail that detect the
presence of a board or part. Board sensors should be adjusted after initial installation
and when the sensors are failing to sense the presence of a board.
B. Enabling Objective
2.13 Describe the procedure to adjust board sensors.
C. Topic Outline
1. Introduction
2. Overview
Board Sensors
Upward Facing Sensors
Downward Facing Sensors
3. Summary and Review
To Next Page
Loading...
