Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 3-2-57 P/N 73-0018-00 (Revision B)
Outline Sheet 3-9-1
Tensioning the Cables
A. Introduction
The Auto Tensioner is a pneumatic device employed to maintain proper tension on the
dispenser cables. Proper cable tension is essential for accurate dispensing. You should
perform an Auto Tension procedure at least once a month, or whenever you experience
accuracy problems in your dispensing process.
B. Enabling Objective
3.9 Setup and run an auto tension procedure.
C. Topic Outline
1. Introduction
2. Overview
Auto Tension Procedure
File Select
Setup
Run
3. Summary and Review
To Next Page
Loading...
