Nordson Asymtek M-2000 - Removing and Replacing the Heater Relay Module

Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 5-2-13 P/N 73-0018-00 (Revision B)
Outline Sheet 5-4-1
Removing and Replacing the Heater Relay Module
A. Introduction
Occasionally a technician may find it necessary to replace the Heater Relay Module. The
following section describes in detail how to remove and replace the Heater Relay Module.
B. Enabling Objective
5.4 Identify steps required to remove and replace the Heater Relay Module.
C. Topic Outline
1. Introduction
2. Overview
 Removing and Replacing the Heater Relay Module
3. Summary and Review