Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 3-2-60 P/N 73-0018-00 (Revision B)
Exercise Sheet 3-9-1
Tensioning the Cables
1. In the Main Window, click on Run a Program.
2. In the Production Window, click on Setup.
3. Select Auto Tensioner from the list of available options.
4. The Tensioner Setup dialog box opens.
5. Select desired options.
6. Click on Run Tensioner.
7. Click on OK.
To Next Page
Loading...
Need help?
General