Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M2000 Dispensing Systems 2-2-17 P/N 73-0018-00 (Revision B)
Table 2-3-1
Recommended Air Pressure Settings
Air Gauge and Regulator Recommended Pressure Setting
Cooling Application dependent.
Fluid
Rear gauge and regulator 40-90 psi
(276-621 kPa)
Precision gauges and regulators are
valve dependent. Refer to the valve
manual specific to the type of valve
installed on your dispensing system.
Main 90-100 psi (621-689 kPa)
Tensionator 60 psi (414 kPa)
Tooling 40 psi (276 kPa)
Valve 40-90 psi (276-621 kPa)
To Next Page
Loading...
Need help?
General