DMTA-10084-01EN, Rev. 2, November 2018
Inspection Mode
27
— If the button opens a submenu, that submenu is opened (see “Using Sidebar
Submenus” on page 27).
4. Repeat the first three steps of this procedure until you are finished making
changes.
5. Press the Shift ( ), Tab ( ) key sequence to dismiss the Sidebar menu.
4.1.3.2 Using Sidebar Submenus
When using a sidebar submenu, you can move the focus from button to button by
pressing the Tab key.
To use the Sidebar submenu buttons
1. Press Tab ( ) to move through the sidebar submenu buttons.
Buttons are highlighted and selected for action as you move through the
submenu.
— If the button you choose has an adjustable parameter value, turn the
adjustment knob to change the value, and then press Tab ( ).
The Shift ( ), Enter ( )key sequence switches the adjustment knob
between coarse and fine adjustment of the highlighted value. A line under the value
indicates a coarse adjustment.
Pressing the Tab key confirms the adjusted parameter value, and then moves
to and selects the next button.
— If the button performs an immediate action, press Enter ( ) to execute
that action.
2. Press ESC ( ) to return to the Sidebar menu.
To Next Page
Loading...
