WWW.NNC.IR
Macro Reference
398
Vision System FH/FZ5 Series
User’s Manual (Z340)
Measurement Controls
GetUnitFigure Gets figure data to the processing unit. Reference:
X
Details (p.554)
ImageFormat Gets the image format of the image in the processing unit. Reference:
X
Details (p.566)
MeasureDispG
Executes display of the measurement result of the
processing unit.
Reference:
X
Details (p.614)
MeasureId$ Gets the measurement identification. Reference:
X
Details (p.615)
MeasureProc Executes measurement processing in a processing unit. Reference:
X
Details (p.616)
SaveMeasureImage Saves the measurement image of the processing unit. Reference:
X
Details (p.673)
SetMeasureImage Sets the measurement image of the processing unit. Reference:
X
Details (p.707)
SetUnitData Sets the data of a processing unit. Reference:
X
Details (p.731)
SetUnitFigure Sets the figure data of the processing unit. Reference:
X
Details (p.733)
SetUnitJudge Sets the judgement result of a processing unit. Reference:
X
Details (p.735)
SetUnitTitle Sets the title of a processing unit. Reference:
X
Details (p.737)
TotalJudge Gets the total judgement result. Reference:
X
Details (p.761)
TransformAngle
Applies the calibration result and position correction
amount in the angle value.
Reference:
X
Details (p.763)
TransformArea
Applies the calibration result and position correction
amount in the area value.
Reference:
X
Details (p.765)
TransformDist
Applies a calibration result and position correction amount
to a distance value.
Reference:
X
Details (p.767)
TransformLine
Applies the calibration result and position correction
amount to a line component value.
Reference:
X
Details (p.769)
TransformXY
Applies the calibration result and position correction
amount to coordinate values.
Reference:
X
Details (p.771)
UnitData Gets the numerical data of a processing unit. Reference:
X
Details (p.778)
UnitData$
Gets the character string data of the specified processing
unit.
Reference:
X
Details (p.780)
UnitData2 Gets the drawing coordinate data of a processing unit. Reference:
X
Details (p.782)
UnitInfo Gets the processing unit information. Reference:
X
Details (p.784)
UnitItemIdent$
Gets the processing item identification name of the
specified processing unit.
Reference:
X
Details (p.786)
UnitJudge Gets the judgement result of a processing unit. Reference:
X
Details (p.788)
UnitNo Gets the processing unit number. Reference:
X
Details (p.790)
UnitTitle$ Gets the title of a processing unit. Reference:
X
Details (p.791)
Command Function References
ClearMeasureData Clears the measurement results of the processing unit. Reference:
X
Details (p.429)
GetMeasureOut Gets the external output setting for measurement results. Reference:
X
Details (p.536)
ImageUpdate Updates the image input from the camera. Reference:
X
Details (p.568)
Measure Executes measurement processing. Reference:
X
Details (p.612)
MeasureStart Allows input of the measurement trigger. Reference:
X
Details (p.617)
MeasureStop Prohibits input of the measurement trigger. Reference:
X
Details (p.619)
Remeasure Executes remeasurement. Reference:
X
Details (p.658)
SaveImage Saves image data. Reference:
X
Details (p.671)
Command Function References
To Next Page
Loading...
Need help?
General
