Omron SYSMAC FH Series User Manual

WWW.NNC.IR
Macro Reference
399
8
Appendices
Vision System FH/FZ5 Series
User’s Manual (Z340)
IO Module Controls
Display Controls
Image Window Controls
SetMeasureOut
Sets the external output setting for the measurement
result.
Reference:
X Details (p.708)
Command Function References
BusyOut Sets the output state of the processing busy signal. Reference:
X Details (p.419)
GetAll Gets the input states of all input terminals. Reference:
X Details (p.528)
GetPlcData Gets data read with the ReadPlcMemory function. Reference:
X Details (p.538)
GetPollingState Gets the polling state of the communication module. Reference:
X Details (p.540)
GetPort Gets the input state of the specified input terminal. Reference:
X Details (p.542)
JudgeOut Sets the output state of the overall judgement signal. Reference:
X Details (p.585)
PutAll Sets the output state of all output terminals. Reference:
X Details (p.643)
PutPort Sets the output state of the specified output terminal. Reference:
X Details (p.645)
ReadPlcMemory Reads a value from the PLC memory area. Reference:
X Details (p.649)
ReceiveData Receives data. Reference:
X Details (p.651)
RunOut Sets the output state of the RUN signal. Reference:
X Details (p.667)
SendData Sends data. Reference:
X Details (p.696)
SendString Sends the character string data. Reference:
X Details (p.698)
SetPlcData
Creates the data that is written with the WritePlcMemory
function.
Reference:
X Details (p.709)
SetPollingState Sets the execution status of the communication module. Reference:
X Details (p.711)
WritePlcMemory Writes values in the PLC memory area. Reference:
X Details (p.807)
Command Function References
DisplayUnitNo
Gets the selection state of the processing unit number of
the flow window.
Reference:
X Details (p.464)
GetImageWindow Get the state of the image window. Reference:
X Details (p.533)
GetTextWindow Gets the state of the text window. Reference:
X Details (p.550)
RefreshImageWindow Updates the image window. Reference:
X Details (p.653)
RefreshJudgeWindow Updates the judgement window. Reference:
X Details (p.654)
RefreshTextWindow Updating the text display window. Reference:
X Details (p.655)
RefreshTimeWindow Updates the display of the information window. Reference:
X Details (p.656)
SetDisplayUnitNo
Sets the processing unit number in the flow window to the
selected state.
Reference:
X Details (p.699)
SetImageWindow Sets the state of the image window. Reference:
X Details (p.704)
SetTextWindow Sets the state of the text window. Reference:
X Details (p.729)
Command Function References
DisplaySubNo Get the sub-image number of the displayed sub-image. Reference:
X Details (p.462)
Command Function References

Omron SYSMAC FH Series Specifications

General

Brand	Omron
Model	SYSMAC FH Series
Category	Industrial Equipment
Language	English