Oracle X7-2 Service Manual

Install a Processor
5.
Return the server to operation.
a.
Install the air baffles.
b.
Install the server top cover.
See “Install the Server Top Cover” on page 210.
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 212.
d.
Reconnect the power cords to the server power supplies and reconnect the
data cables.
See “Reconnect Data Cables and Power Cords” on page 214.
e.
Power on the server.
See “Power On the Server” on page 214.
Verify that the power supply AC OK LED is lit.
6.
Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at
http://www.oracle.com/goto/ilom/docs for more information about the following steps.
a.
To show server faults, log in to the server as root using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
-> show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and
issue the fmadm faulty command, or log into the Oracle ILOM service processor from
the Oracle ILOM Fault Management Shell and issue the fmadm faulty command. For
more information about how to use the Oracle ILOM Fault Management Shell and
148 Oracle Server X7-2 Service Manual • October 2017

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies