Panasonic AFP7MC16EC

5.3 Positioning Table Setting
5-15
 Setting items (Additional items for 3-axis interpolation)
Parameter
name
Default
Description
Interpolation
operation
0: Linear
(Composite
speed)
Select one from the following operation patterns.
0: Linear (Composite speed)
1: Linear (Major axis speed)
A: Spiral (Center point / CW direction / 1st axis feed)
B: Spiral (Center point / CCW direction / 1st axis feed)
C: Spiral (Center point / CW direction / 2nd axis feed)
D: Spiral (Center point / CCW direction / 2nd axis feed)
E: Spiral (Center point / CW direction / 3rd axis feed)
F: Spiral (Center point / CCW direction / 3rd axis feed)
L: Spiral (Pass point / 1st axis feed)
M: Spiral (Pass point / 2nd axis feed)
N: Spiral (Pass point / 3rd axis feed)
1st axis (L)
Movement
amount
0
Input the movement amount (position command value). The auxiliary point
is input for the spiral interpolation.
The axis numbers allocated to interpolation groups are displayed in (L), (m)
and (n) in the ascending order from the smaller number.
1st axis (L)
Auxiliary point
0
2nd axis (m)
Movement
amount
0
2nd axis (m)
Auxiliary point
0
3rd axis (n)
Movement
amount
0
3rd axis (n)
Auxiliary point
0