Phoenix Contact PSRmodular - Page 11

For your safety
109241_en_03 PHOENIX CONTACT 11 / 232
Gateways
Compatibility list for base
modules
The PSR-M-B2 base module can be used to configure all extension modules from the
PSRmodular system.
The PSR-M-B1 base module can only be used to configure the following extension mod-
ules:
Item
Order
No.
Screw/
Push-in
Type
PSR-M-GW-PB
1105099
1105100
PROFIBUS
PSR-M-GW-PN
1105101
1105102
PROFINET
PSR-M-GW-DNET
1105103
1105473
DeviceNet
PSR-M-GW-CAN
1105104
1105105
CANopen
PSR-M-GW-ETH
1105106
1105107
EtherNet/IP
PSR-M-GW-ModTCP
1105108
1105127
Modbus/TCP
PSR-M-GW-CCLINK
1105128
1105129
CC-Link
PSR-M-GW-ECAT
1105130
1105131
EtherCAT
Safe extension modules Gateways Standard extension modules
PSR-M-EF2 PSR-M-GW-PB PSR-M-E1
PSR-M-EF3 PSR-M-GW-PN PSR-M-E2
PSR-M-EF4 PSR-M-GW-DNET
PSR-M-EF5 PSR-M-GW-CAN
PSR-M-EF6 PSR-M-GW-ETH
PSR-M-EF8 PSR-M-GW-ModTCP
PSR-M-EM1 PSR-M-GW-CCLINK
PSR-M-EM2 PSR-M-GW-ECAT
PSR-M-EM3
PSR-M-EM4
PSR-M-EM5
PSR-M-EM6
PSR-M-EM7
For further information on the extension modules, please refer to the technical data sheets
available in the Phoenix Contact E-Shop.