PSRmodular Software: Basics
109241_en_03 PHOENIX CONTACT 55 / 232
System restart
To restart the system (e.g., following project download or an error), click on the icon in
the tool bar. This resets the system and restarts it.
4.2.16 Monitor (status of I/Os)
To display the I/O states in real time, enable the “Monitor” icon.
Monitor
The I/Os are displayed in table format:
– Input status
– Input diagnostics (ON/OFF)
– Output status
– Output diagnostics (ON/OFF)
Figure 4-18 Example monitor display for the I/Os
If the system detects an inconsistent hardware configuration, the base module signals an
incompatibility via LEDs and restarts.
To Next Page
Loading...