Phoenix Contact PSRmodular - Figure 5-59 SPEED-RANGE Function Block (SSR, Safe Speed Range)

Items and operators of the PSRmodular Software
109241_en_03 PHOENIX CONTACT 107 / 232
5.2.2.2 SPEED-RANGE function block (SSR, safe speed range
1
)
The “SPEED-RANGE” function block checks the speed of a drive by setting the “R
ANGE”
output to logic “1” if the measured speed is within a predefined speed range.
Figure 5-59 “SPEED-RANGE” function block (SSR, safe speed range)
1
The speed of the motor is kept within specified limits.