Phoenix Contact PSRmodular - Figure 5-69: Example with Four Thresholds

Items and operators of the PSRmodular Software
109241_en_03 PHOENIX CONTACT 117 / 232
Thresholds number
(operating mode inputs)
Enables the number of threshold values for the maximum speed to be entered. Changing
this value increases the number of available thresholds from at least one to a maximum of
eight.
If more than one threshold value is used, the input terminal points for the selected number
of threshold values appear in the bottom part of the function block.
Figure 5-69 Example with four thresholds
Setting 2 limit values:
Setting 4 limit values:
NOTE:
When using several threshold values, the lowest speed level must be assigned to Speed
1. All subsequent threshold values (2 ... 8) must be assigned in ascending order.
IN 1 Limit values
0 Speed 1
1 Speed 2
IN 2 IN 1 Limit values
0 0 Speed 1
0 1 Speed 2
1 0 Speed 3
1 1 Speed 4