Installation and startup
109241_en_03 PHOENIX CONTACT 211 / 232
6 Installation and startup
Qualified personnel Only qualified personnel may install and start up the PSRmodular system. See “Qualified
personnel” on page 12.
6.1 Example for installation and startup
Figure 6-1 Function diagram
For detailed information, please refer to the sections specified and the help for the
PSRmodular Software configuration software.
Mechanical installation
Establish connections between
PSRmodular and the external
sensors and actuators.
Project design of the circuit diagram
Valdation of the circuit diagram
Establish theUSB connection
to the base module.
Download
the projekt to the base module.
Carry out
a coplete functional test
including fault simulation.
OK?
Terminate
the USB connection.
Generate and archive
the report and the circuit diagram.
YES
NO
YES
NO
OK?
To Next Page
Loading...