Phoenix Contact PSRmodular - Function Windows: Items - Operator - Configuration

PSRmodular Software: Basics
109241_en_03 PHOENIX CONTACT 43 / 232
4.2.5 Function windows: Items – Operator – Configuration
Figure 4-5 Function windows: Items – Operator – Configuration
Items function window (1)
The function window contains the various function blocks. The function blocks are divided
into different categories:
– Input
– Speed Control
– Analog Input
– Output
– Comments
Operator function window (2)
The function window contains various operators. The operators are divided into different
categories:
– Logic
– Memories
– Safety Guard Lock
– Counters
– Timers
– Muting
– Analog Operators
– Miscellaneous
Configuration function window (3)
This area contains a description of the hardware configuration.
Visual Configuration function window (4)
The function window contains the graphical representation of the hardware configuration. In
this window, you can navigate between the I/Os of the modules. Information on the I/Os is
displayed by right-clicking.
1
2
3
4