PSRmodular Software: Basics
109241_en_03 PHOENIX CONTACT 47 / 232
4.2.11 Resource allocation
Executing this command ( icon in the standard tool bar) shows all the elements that are
used, such as inputs, outputs, status, external input signals (EI), and external output signals
(EQ).
Figure 4-9 Example of resource allocation
NOTE:
The validation function only evaluates the conformity of the programming and the config-
uration of the hardware in relation to the configuration rules of the PSRmodular system.
This validation therefore does not guarantee that the configuration corresponds to the re-
quirement specification (SRS). This should be evaluated as part of an overall validation.
To Next Page
Loading...