Items and operators of the PSRmodular Software
109241_en_03 PHOENIX CONTACT 191 / 232
Parameters
Allowed error Selection of the permissible error between the two analog signals (±0.1 ... ±100.0).
Force output FALSE on
anomaly
This option sets output “O” to logic “0” if a sensor malfunction is detected at the analog in-
puts. The error must not be greater than 10% of the defined measuring range (e.g.,
4 ... 20 mA --> 16 * 0.1 = 1.6 mA).
To Next Page
Loading...