R&S ZNL Series - R&S Support Information

General instrument setup
R&S
®
ZNL/ZNLE
135User Manual 1178.5966.02 ─ 20
For more helpful information for support, see also Chapter 12.3, "Collecting information
for support", on page 1103
● R&S support information.......................................................................................135
● Self-test settings and results.................................................................................136
● Calibration signal display...................................................................................... 137
● Service functions...................................................................................................138
7.5.1 R&S support information
Access: [Setup] > "Service" > "R&S Support"
In case of errors you can store useful information for troubleshooting and send it to
your Rohde & Schwarz support center.
Create R&S Support Information ............................................................................... 135
Save Device Footprint.................................................................................................136
Create R&S Support Information
Creates a *.zip file with important support information. The *.zip file contains the sys-
tem configuration information ( "Device Footprint" ), the current eeprom data and a
screenshot of the screen display.
This data is stored to the C:\Users\Public\Documents\Rohde-Schwarz\ZNL directory on
the instrument.
Service functions