R&S ZNL Series User Manual

Data management
R&S
®
ZNL/ZNLE
98User Manual 1178.5966.02 ─ 20
Rename ← QuickSave 1 / ... / QuickSave 10
Displays an input field to rename the save set, if write protection is disabled.
Write Protection ← QuickSave 1 / ... / QuickSave 10
Enables or disables write protection for the save set. If enabled, the save set cannot be
renamed or overwritten.
Storage Type (Save only)
Defines which type of settings are stored in the save set.
"Instrument
with all Chan-
nels"
The instrument settings for all currently active "Channel"s are stored.
"Current Chan-
nel"
Only the instrument settings for the currently selected measurement
"Channel"s are stored.
Recall
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, a new channel setup with the stored
settings is activated, otherwise all "Channel"s and instrument settings are overwritten
with the stored settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe on page 585
6.2.2 Configurable storage and recall
The more sophisticated storage and recall functions allow you to define which settings
are stored, and where the settings file is stored to. Any settings file can be selected for
recall.
● Stored data types....................................................................................................98
● Storage location and filename.................................................................................99
● Save and recall dialog boxes.................................................................................. 99
● Startup recall settings............................................................................................101
6.2.2.1 Stored data types
The following types of data can be stored to and loaded from files via the "Save" dialog
box on the R&S ZNL/ZNLE:
Table 6-1: Items that can be stored to files
Item Description
Current Settings Current instrument and measurement settings.
Storing and recalling instrument settings and measurement data

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English