R&S ZNL Series - Hcopy:device:language; Hcopy:item:window:text; Hcopy[:Immediate]; Hcopy[:Immediate]:Next

Command reference
R&S
®
ZNL/ZNLE
593User Manual 1178.5966.02 ─ 20
Example:
HCOP:DEV:COL ON
HCOPy:DEVice:LANGuage <Language>
This command selects the file format for a print job or to store a screenshot to a file.
Parameters:
<Language> BMP, JPG, PNG
Data format for output to files only.
Example: To print a screenshot to a PNG file:
//Destination: PNG file
HCOP:DEV:LANG PNG
//Define file name
MMEM:NAME 'C:\R_S\instr\user\MeasurementTestReport.png'
//Print
HCOP:IMM
Manual operation: See "Destination: File" on page 112
HCOPy[:IMMediate]
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME.
Manual operation:
See "Print" on page 110
HCOPy[:IMMediate]:NEXT
This command initiates a print job.
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
Manual operation:
See "Print" on page 110
HCOPy:ITEM:WINDow:TEXT <Comment>
This command defines a comment to be added to the printout.
Parameters:
<Comment> String containing the comment.
Manual operation: See "Comment" on page 107
Common instrument commands