R&S ZNL Series - Example: *Rst; Calc:par:sdef Trc1, A1; Calculate<Ch>:Parameter:catalog

Command reference
R&S
®
ZNL/ZNLE
709User Manual 1178.5966.02 ─ 20
Example:
*RST; CALC:PAR:SDEF 'Trc1', 'a1'
Reset the instrument and select a wave quantity a
1
for the trace
Trc1.
DISP:WIND:TRAC:FEED 'Trc1'
Display the generated trace in the active window.
CALC:MATH:SDEF '1.1*Data'; STAT ON
Define a mathematical trace and display it instead of the active
data trace.
CALC:MATH:WUN ON
Manual operation: See "Result is Wave Quantity" on page 359
CALCulate:PARameter...
The CALCulate:PARameter... commands assign names and measurement
parameters to traces. The commands are device-specific.
CALCulate<Ch>:PARameter:CATalog?.............................................................................709
CALCulate<Ch>:PARameter:CATalog:SENDed?............................................................... 710
CALCulate<Ch>:PARameter:DEFine:SGRoup.................................................................. 710
CALCulate<Chn>:PARameter:COPY................................................................................711
CALCulate<Ch>:PARameter:DELete................................................................................712
CALCulate:PARameter:DELete:ALL.................................................................................713
CALCulate<Ch>:PARameter:DELete:CALL.......................................................................713
CALCulate<Ch>:PARameter:DELete:CMEMory................................................................ 713
CALCulate:PARameter:DELete:MEMory...........................................................................713
CALCulate<Ch>:PARameter:DELete:SGRoup.................................................................. 713
CALCulate<Ch>:PARameter:MEASure............................................................................ 714
CALCulate<Ch>:PARameter:MEASure:SENDed............................................................... 714
CALCulate<Ch>:PARameter:SDEFine............................................................................. 715
CALCulate<Ch>:PARameter:SDEFine:SENDed................................................................717
CALCulate<Ch>:PARameter:SELect................................................................................717
CALCulate<Ch>:PARameter:CATalog?
Returns the trace names and measurement parameters of all traces assigned to a par-
ticular channel.
The result is a string containing a comma-separated list of trace names and measure-
ment parameters, e.g. 'CH4TR1,S11,CH4TR2,S12'. The measurement parameters
are returned according to the naming convention of CALCulate<Ch>:PARameter:
SDEFine. The order of traces in the list reflects their creation time: The oldest trace is
the first, the newest trace is the last trace in the list.
Suffix:
<Ch>
.
Channel number. If unspecified the numeric suffix is set to 1.
VNA command reference