R&S ZNL Series User Manual

Network and remote settings
R&S
®
ZNL/ZNLE
159User Manual 1178.5966.02 ─ 20
The error message remains in place when you switch to "Local" mode. To close the
message box, select the
"Close" icon.
Only the most recent error is displayed in remote mode. However, in local mode, all
errors that occurred during remote operation are listed in a separate tab of the "Net-
work + Remote" dialog box (see Chapter 8.4.5, "Remote errors", on page 161).
Remote command:
SYSTem:ERRor:DISPlay on page 615
SYSTem:ERRor:CLEar:REMote on page 619
8.4.3 Compatibility settings
Access: [SETUP] > "Network+Remote" > "Compatibility"
The R&S ZNL/ZNLE can emulate the GPIB interface of other signal and spectrum ana-
lyzers, e.g. in order to use existing control applications.
Compatibility with former R&S signal and spectrum analyzers
As a rule, the R&S ZNL/ZNLE supports most commands from previous R&S signal and
spectrum analyzers such as the FSQ, FSP, FSU, or FSV. However, the default values,
in particular the number of sweep points or particular bandwidths, may vary. Therefore,
the R&S ZNL/ZNLE can emulate some other devices, including their default values, in
order to repeat previous measurements or support existing control applications as in
legacy systems.
Language.................................................................................................................... 159
Language
Defines the system language used to control the instrument.
Note: Emulating previous R&S signal and spectrum analyzers. This function is also
used to emulate previous R&S signal and spectrum analyzers.
As a rule, the R&S ZNL/ZNLE supports most commands from previous R&S signal and
spectrum analyzers. However, the default values, in particular the number of sweep
points or particular bandwidths, may vary. Therefore, the R&S ZNL/ZNLE can emulate
some other devices, including their default values, in order to repeat previous mea-
surements or support existing control applications as in legacy systems.
Network and remote control settings

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English