R&S ZNL Series User Manual

VNA GUI reference
R&S
®
ZNL/ZNLE
353User Manual 1178.5966.02 ─ 20
For the relation between a data trace and its associated memory traces, see "Coupling
of data and memory traces" on page 351.
Remote command:
CALCulate<Chn>:MATH:MEMorize
TRACe:COPY:MATH
Destination
Selects the destination for the Data to <Destination> and Data & Func to <Destination>
operations.
The destination can be one of the following:
●
An existing memory trace of the active data trace.
The existing memory trace is overwritten.
●
"New Trace"
The data are copied to a new memory trace, associated to the current data trace.
Remote command:
n/a
Show <Active Data Trace>
Shows or hides the active data trace in the diagram.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
Show <Mem>
Shows or hides the active memory trace or the first memory trace of the active data
trace.
If no memory trace is associated with the active data trace, "Show <Mem>" is disabled.
Remote command:
DISPlay[:WINDow<Wnd>]:TRACe<WndTr>:SHOW
10.6.3 All Mem All Data tab
Performs actions on all data or memory traces in the active channel setup.
Background information
Refer to "Trace types" on page 195.
Trace softtool

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English