Command reference
R&S
®
ZNL/ZNLE
591User Manual 1178.5966.02 ─ 20
Example:
HCOP:DEST1 'SYST:COMM:CLIP'
HCOP:CONT WIND
HCOP:DEST1?
//Result: 'MMEM'
HCOP:DEV:LANG1?
//Result: 'PDF'
"Print to clipboard" is automatically switched to "print to PDF file"
when the contents are switched to "multiple windows".
Manual operation: See "Print Screenshot" on page 107
HCOPy:CMAP<it>:DEFault<ci>
This command defines the color scheme for print jobs.
Suffix:
<it>
.
Irrelevant.
<ci> See table below
Example:
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a print-
out.
Manual operation: See "Print Colors" on page 125
Gui setting Description Remote command
"Screen Colors (Print)" Selects the current screen colors for the
printout. The background is always printed in
white and the grid in black.
HCOP:CMAP:DEF1
"Optimized Colors" Selects an optimized color setting for the
printout to improve the visibility of the colors
(default setting). Trace 1 is blue, trace 2
black, trace 3 green, and the markers are
turquoise. The background is always printed
in white and the grid in black.
HCOP:CMAP:DEF2
"Screen Colors
(Screenshot)"
Selects the current screen colors without any
changes for a screenshot.
HCOP:CMAP:DEF4
HCOPy:DESTination<di> <Destination>
This command selects the destination of a print job.
Note: To print a screenshot to a file, see HCOPy:DEVice:LANGuage on page 593.
Suffix:
<di>
.
Irrelevant.
Parameters:
<Destination>
Common instrument commands