To Next Page

To Previous Page

VNA concepts and features

R&S

ZNL/ZNLE

194User Manual 1178.5966.02 ─ 20

9.2 VNA screen elements

This section describes manual operation of the VNA mode, including trace settings,

markers and diagrams. For a description of the different quantities measured by the

instrument, refer to Chapter 9.3, "Measurement results", on page 215.

9.2.1 Display elements of a VNA diagram

The central part of the screen is occupied by one or more diagrams.

A diagram is simply a rectangular portion of the screen used to display traces. Dia-

grams are independent of trace and channel settings. A diagram can contain a practi-

cally unlimited number of traces which can be assigned to different channels.

Most diagram settings are arranged on the "Diagram" and "Split" tabs of the "Display

Lines" softtool. To assign traces and channels to diagrams, use the control elements

on the Trace > "Traces" and Channel > "Channels" softtool tabs (hardkeys [Trace] and

[Channel]).

Diagrams can contain:

●

A title (optional)

●

The diagram number (or label)

●

Measurement results, in particular traces and marker values (optional)

●

An indication of the basic channel and trace settings

●

Context menus providing settings which are related to a particular display element

The examples in this section have been taken from Cartesian diagrams. All other dia-

gram types provide the same display elements.

VNA screen elements

R&S ZNL Series User Manual

Other manuals for R&S ZNL Series