R&S ZNL Series - Hcopy:page:window:state; Hcopy:tdstamp:state; System:communicate:printer:enumerate:first

Command reference
R&S
®
ZNL/ZNLE
597User Manual 1178.5966.02 ─ 20
Example:
HCOP:PAGE:WIND2:SCAL 0
Manual operation: See "Scaling" on page 114
HCOPy:PAGE:WINDow:STATe <Channel>, <Window>, <State>
This command selects the windows to be included in the printout for HCOPy:CONTent
on page 590.
Parameters:
<Channel> String containing the name of the channel setup.
For a list of available channel setup types use INSTrument:
LIST? on page 570.
<Window> String containing the name of the existing window.
By default, the name of a window is the same as its index.
<State> 1 | 0 | ON | OFF
1 | ON
The window is included in the printout.
0 | OFF
The window is not included in the printout.
*RST: 1
Example:
HCOP:PAGE:WIND2:STAT 'IQ Analyzer','1',1
Manual operation: See "Print Multiple Windows" on page 107
HCOPy:TDSTamp:STATe <State>
This command includes or excludes the time and date in the printout.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
The time and date are printed.
0 | OFF
The time and date are not printed.
*RST: 1
Manual operation: See "Print Date and Time" on page 108
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
This command queries the name of the first available printer.
To query the name of other installed printers, use SYSTem:COMMunicate:PRINter:
ENUMerate[:NEXT] on page 598.
Manual operation:
See "Printer Name" on page 112
Common instrument commands