R&S ZNL Series User Manual

General instrument setup
R&S
®
ZNL/ZNLE
139User Manual 1178.5966.02 ─ 20
The selection list includes all functions previously selected (since the last "Clear His-
tory" action).
Remote command:
DIAGnostic:SERVice:SFUNction on page 621
Send
Starts the selected service function.
Remote command:
DIAGnostic:SERVice:SFUNction on page 621
Clear History
Deletes the list of previously selected service functions.
Password
Most service functions require a special password as they may disrupt normal opera-
tion of the R&S ZNL/ZNLE. There are different levels of service functions, depending
on how restrictive their use is handled. Each service level has a different password.
"Reset Password" clears any previously entered password and returns to the most
restrictive service level.
Remote command:
SYSTem:PASSword[:CENable] on page 623
SYSTem:PASSword:RESet on page 623
Clear Results
Clears the result display for all previously performed service functions.
Remote command:
DIAGnostic:SERVice:SFUNction:RESults:DELete on page 622
Save Results
Saves the results of all previously performed service functions to a file stored as
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\results\
Servicelog.txt.
Remote command:
DIAGnostic:SERVice:SFUNction:RESults:SAVE on page 622
Result list
The Results List indicates the status and results of the executed service functions.
7.6 VNA setup
The VNA Setup dialog offers instrument settings that are only relevant for the VNA
mode.
VNA setup

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English