R&S ZNL Series - Calculate:data:dall; Calculate<Ch>:Data:mdata:interpolate

Command reference
R&S
®
ZNL/ZNLE
654User Manual 1178.5966.02 ─ 20
CALCulate<Ch>:DATA:CHANnel:DALL? <Format>
Reads the current response values of all data traces of the selected channel. Use
CALCulate<Ch>:DATA:CHANnel:ALL? to query data traces and memory traces.
Suffix:
<Ch>
.
Channel number
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Trace data either in ASCII or block data format, depending on
the current FORMat[:DATA] setting.
Usage: Query only
CALCulate:DATA:DALL? <Format>
Reads the current response values of all data traces of the current channel setup. Use
CALCulate:DATA:ALL? to query data traces and memory traces.
Query parameters:
<Format> FDATa | SDATa | MDATa
Output format for the S-parameter data, see
CALCulate<Chn>:DATA.
Return values:
<Data> Response values either in ASCII or block data format, depend-
ing on the current FORMat[:DATA] setting.
Example: Analogous to CALCulate:DATA:DALL?; see
CALCulate<Chn>:DATA.
Usage: Query only
CALCulate<Ch>:DATA:MDATa:INTerpolate
Uses linear inter-/extrapolation to "regrid" all memory traces of the related channel to
the channel's current stimulus values.
Suffix:
<Ch>
.
Channel number
Usage: Event
VNA command reference