R&S ZNL Series User Manual

Network and remote settings
R&S
®
ZNL/ZNLE
160User Manual 1178.5966.02 ─ 20
"SCPI"
(Default) The default R&S ZNL/ZNLE commands are used.
"FSV"
The commands and settings for the R&S FSV instrument are used.
"FSL"
The commands and settings for the R&S FSL instrument are used.
Remote command:
SYSTem:LANGuage on page 616
8.4.4 LAN settings
Access: [SETUP] > "Network + Remote" > "LAN" tab
In a LAN network, the R&S ZNL/ZNLE can be accessed via any web browser (e.g. the
Microsoft Internet Explorer) to perform the following tasks:
●
Modifying network configurations
●
Modifying device configurations
●
Monitoring connections from the device to other devices
The "LAN" tab of the "Network + Remote" dialog box provides basic LAN configuration
functions and information for the R&S ZNL/ZNLE.
Alternatively, you can change the LAN settings using the web browser interface.
For details see Chapter 8.5.1.4, "How to configure the LAN using the web browser
interface", on page 168.
Only user accounts with administrator rights are able to use LAN configuration and
web browser functionality.
Network and remote control settings

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English