R&S ZNL Series User Manual

Network and remote settings
R&S
®
ZNL/ZNLE
168User Manual 1178.5966.02 ─ 20
Each instrument is delivered with an assigned computer name, but this name can be
changed.
To change the instrument's computer name
1. Press the [Setup] key and then the "Network + Remote" softkey.
The current "Computer Name" is displayed in the "Network" tab.
2. Enter the new computer name and close the dialog box.
The configuration is saved, and you are prompted to restart the instrument.
3. Confirm the displayed message ("Yes" button) to restart the instrument.
8.5.1.4 How to configure the LAN using the web browser interface
The instrument's "LXI" web browser interface works correctly with all W3C compliant
browsers.
► In the web browser, open the http://<instrument-hostname> or http://
<instrument-ip-address> page, e.g. http://10.113.10.203.
The default password to change "LXI" configurations is LxiWebIfc.
The "Instrument Home Page" (welcome page) opens.
The instrument home page displays device information, including the VISA resource
string, in read-only format.
How to set up a network and remote control

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English