R&S ZNL Series - Remote Errors

Network and remote settings
R&S
®
ZNL/ZNLE
161User Manual 1178.5966.02 ─ 20
Current LAN Configuration..........................................................................................161
LAN Password............................................................................................................ 161
LXI Reset.................................................................................................................... 161
Current LAN Configuration
Displays the current LAN information from the R&S ZNL/ZNLE (read-only).
"Computer
name"
Name of the R&S ZNL/ZNLE as defined in the operating system (see
also "Computer Name" on page 156)
"MAC address"
Media Access Control address (MAC address), a unique identifier for
the network card in the R&S ZNL/ZNLE
"IP address"
IP address of the R&S ZNL/ZNLE as defined in the operating system
(see also "IP Address" on page 156).
LAN Password
Password for LAN configuration. The default password is LxiWebIfc.
Remote command:
SYSTem:LXI:PASSword on page 617
LXI Reset
Resets the "LXI" configuration to its default settings (LCI function).
Parameter Value
TCP/IP Mode DHCP + Auto IP Address
Dynamic DNS Enabled
ICMP Ping Enabled
Password for "LXI" configuration LxiWebIfc
The LAN settings are configured in the "Network" tab of the "Network + Remote" dialog
box or using the instrument's "LXI" web browser interface.
Remote command:
SYSTem:LXI:LANReset on page 617
8.4.5 Remote errors
Access: [SETUP] > "Network + Remote" > "Remote Errors " tab
The error messages generated by the R&S ZNL/ZNLE during remote operation are
displayed here.
The messages are displayed in the order of their occurrence; the most recent mes-
sages are placed at the top of the list.
Network and remote control settings