R&S ZNL Series User Manual

Safety and regulatory information
R&S
®
ZNL/ZNLE
16User Manual 1178.5966.02 ─ 20
Using headphones
Take the following measures to prevent hearing damage. Before using headphones,
check the volume and reduce it if necessary. If you monitor varying signal levels, take
off the headphones and wait until the signal has settled. Then adjust the volume.
Cleaning the product
Use a dry, lint-free cloth to clean the product. When cleaning, keep in mind that the
casing is not waterproof. Do not use liquid cleaning agents.
Meaning of safety labels
Safety labels on the product warn against potential hazards.
Potential hazard
Read the product documentation to avoid personal injury or product damage.
Electrical hazard
Indicates live parts. Risk of electric shock, fire, personal injury or even death.
Hot surface
Do not touch. Risk of skin burns. Risk of fire.
Protective conductor terminal
Connect this terminal to a grounded external conductor or to protective ground. This connec-
tion protects you against electric shock if an electric problem occurs.
1.2 Labels on R&S ZNL/ZNLE
Labels on the casing inform about:
●
Personal safety, see "Meaning of safety labels" on page 16
●
Product and environment safety, see Table 1-1
●
Identification of the product, see Chapter 4.2.2.14, "Device ID", on page 51
Table 1-1: Labels regarding R&S
ZNL/ZNLE and environment safety
Labeling in line with EN 50419 for disposal of electrical and electronic equipment after the prod-
uct has come to the end of its service life.
For more information, see "Disposing electrical and electronic equipment" on page 1108.
Labeling in line with directive 2006/66/EC for disposal of batteries after they have come to the
end of their service life.
For more information, see "Disposing electrical and electronic equipment" on page 1108.
Labels on R&S ZNL/ZNLE

R&S ZNL Series Specifications

General

Brand	R&S
Model	ZNL Series
Category	Measuring Instruments
Language	English