Getting Started
R&S
®
ZNL/ZNLE
25User Manual 1178.5966.02 ─ 20
Always fold the feet completely in or out. With folded-out feet, do not place any-
thing on top or underneath.
4.
NOTICE! Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10 cm between the fan openings of the product
and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radiators
or other products.
4.1.4.2 Mounting the R&S ZNL/ZNLE in a rack
To prepare the rack
1. Observe the requirements and instructions in "Setting up the product" on page 14.
2.
NOTICE! Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S ZNL/ZNLE in a rack
1. Use an adapter kit to prepare the R&S ZNL/ZNLE for rack mounting.
a) Order the rack adapter kit designed for the R&S ZNL/ZNLE. For the order num-
ber, see the data sheet.
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S ZNL/ZNLE to shelf height.
3. Grab the handles and push the R&S ZNL/ZNLE onto the shelf until the rack brack-
ets fit closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2 Nm to secure
the R&S ZNL/ZNLE in the rack.
To unmount the R&S ZNL/ZNLE from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S ZNL/ZNLE from the rack.
3. If placing the R&S ZNL/ZNLE on a bench top again, unmount the adapter kit from
the R&S ZNL/ZNLE. Follow the instructions provided with the adapter kit.
4.1.4.3 Portable operation
An optional carrying bag designed specifically for the R&S ZNL allows you to protect
the instrument while working in the field. The bag includes ventilation areas at the posi-
tion of the ventilation outlets in the casing to ensure air circulation. The transparent
cover allows you to operate the instrument without removing it from the bag. With the
Preparing for use
To Next Page
Loading...
Need help?
General
