VNA GUI reference
R&S
®
ZNL/ZNLE
475User Manual 1178.5966.02 ─ 20
Figure 10-13: Calibration Unit wizard, step 1: Ports
Figure 10-14: Calibration Unit wizard, step 1: Ports (Inline Calibration System)
Ports
Selects the test ports to be calibrated.
Note: Calibration and port de-/activation.
The analyzer fimware automatically activates/deactivates ports during/after a (success-
ful) calibration:
●
Calibrated ports that were previously disabled, are automatically enabled as single-
ended logical ports.
Cal softtool
To Next Page
Loading...
