Rockwell Automation PowerFlex 7000

Parameter Descriptions 2-83
7000-TD002A-EN-P – September 2007
External Fault 3 Class [ExtFault3 Class]
Linear Number: 202
Default Value: Class2 Fault
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the class of the external fault 3. This is applicable only if the optional XIO board
is installed. The following options are available:
Disable This disables the fault input.
Class1 Fault The drive will shut down immediately
Class2 Fault The drive will perform a controlled shut down
Warning The drive will not shut down but a warning will be displayed
External Fault 4 Class [ExtFault4 Class]
Linear Number: 203
Default Value: Class2 Fault
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the class of the external fault 4. This is applicable only if the optional XIO board
is installed. The following options are available:
Disable This disables the fault input.
Class1 Fault The drive will shut down immediately
Class2 Fault The drive will perform a controlled shut down
Warning The drive will not shut down but a warning will be displayed
External Fault 5 Class [ExtFault5 Class]
Linear Number: 204
Default Value: Class2 Fault
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the class of the external fault 5. This is applicable only if the optional XIO board
is installed. The following options are available:
Disable This disables the fault input.
Class1 Fault The drive will shut down immediately
Class2 Fault The drive will perform a controlled shut down
Warning The drive will not shut down but a warning will be displayed
External Fault 6 Class [ExtFault6 Class]
Linear Number: 205
Default Value: Class2 Fault
Access Level: Basic
Read/Write: Read/Write
This parameter specifies the class of the external fault 6. This is applicable only if the optional XIO board
is installed. The following options are available:
Disable This disables the fault input.
Class1 Fault The drive will shut down immediately
Class2 Fault The drive will perform a controlled shut down
Warning The drive will not shut down but a warning will be displayed