Remote Control
R&S
®
FSVA/FSV
1046Operating Manual 1176.7510.02 ─ 09
Figure 4-9: Signal to be recorded in IQ mode
Example 1: Signal only
The following sample program records the signal in edge mode and displays only the
signal, without gaps and noise.
Used values
sample rate: 32 MHz
number of IQ samples: 128000
delay = 11020 samples
length =15500 samples
trigger mode: EXT
Program
:TRACe1:IQ ON
Trace:iq:set NORM,0,32000000,EXT,POS, 11020,128000
:TRACe1:IQ:EGATe ON
:TRACe1:IQ:EGATe:TYPE EDGE
:TRACe1:IQ:EGATe:LENGth 15500
Remote Control – Programming Examples
To Next Page
Loading...
