Instrument Functions
R&S
®
FSVA/FSV
174Operating Manual 1176.7510.02 ─ 09
The submenu contains the following commands:
●
"Show Error Flag" on page 174
●
"Auto select Reference" on page 174
Show Error Flag ← Handle missing Ext. Ref
If this option is selected, an error flag is displayed in the status bar of the display when
an external reference is selected but none is available.
Remote command:
[SENSe:]ROSCillator:SOURce on page 955
Auto select Reference ← Handle missing Ext. Ref
If this option is selected, the instrument automatically switches back to the internal ref-
erence if no external reference is available. Note that you must re-activate the external
reference if it becomes available again at a later time.
Remote command:
[SENSe:]ROSCillator:SOURce on page 955
Transducer
Opens the "Select Transducer" dialog box and a submenu to activate or deactivate
defined transducer factors, to generate new transducer factors or to edit existing ones.
In the "Select Transducer" dialog box, a transducer factor can be edited, deleted or
copied, if selected, using the corresponding softkeys. The default directory in which the
transducer factors are saved is displayed (C:\R_S\INSTR\TRD; the extension of
transducer factor files is *.TDF). Subdirectories can be added or deleted via the file
manager. They are displayed or hidden using the arrow keys or the Show Directory
softkey / "Hide Directory" button.
Two different directory views are possible: If the "Show all" option is activated, all
transducer factors in the directory are displayed. If the "Show compatible" option is
activated, only the compatible transducer factors in the directory are displayed.
The submenu contains the following commands:
●
"Active (On/Off)" on page 174
●
"Edit" on page 175 >
●
"New" on page 176
●
"Copy to" on page 176
●
"Delete" on page 176
●
"Ref Level Adjust (Man/Auto)" on page 177
●
"Show Directory" on page 177
Remote command:
[SENSe:]CORRection:TRANsducer:SELect on page 953
Active (On/Off) ← Transducer
Activates or deactivates the selected transducer factor. A maximum of 8 transducer
factors can be activated at the same time. Each time an additional transducer factor is
activated, its unit compatibility is checked. If one factor has a different unit than dB, all
the other activated factors must have the unit dB.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
