Rohde & Schwarz FSVA - Page 256

Instrument Functions
R&S
®
FSVA/FSV
256Operating Manual 1176.7510.02 ─ 09
Negative Peak ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "Negative Peak" detector.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET NEG, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
Sample ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "Sample" detector.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET SAMP, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
RMS ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "RMS" detector.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET RMS, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
Average ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "Average" detector.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET AVER, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
Quasipeak ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "Quasipeak" detector.
The quasipeak detector is available with option R&S FSV-K54.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET QPE, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
CISPR Average ← Detector ← Trace 1/Trace 2/Trace 3/Trace 4/Trace 5/Trace 6
Selects the "CISPR Average" detector.
The CISPR Average detector is available with option R&S FSV-K54.
For details see Chapter 3.2.8.6, "Detector Overview", on page 265.
Remote command:
DET CAV, see [SENSe:][WINDow:]DETector<trace>[:FUNCtion]
on page 860
Measurement Parameters