Instrument Functions
R&S
®
FSVA/FSV
281Operating Manual 1176.7510.02 ─ 09
More Markers
Opens a sub-menu to select one of up to 16 available markers. See "Marker 1 / Marker
2 / Marker 3 / … Marker 16,/ Marker Norm/Delta" on page 280.
Marker to Trace
Opens an edit dialog box to enter the number of the trace on which the marker is to be
placed.
Remote command:
CALCulate<n>:MARKer<m>:TRACe on page 673
CALCulate<n>:DELTamarker<m>:TRACe on page 625
Marker Wizard
Opens a configuration dialog for markers. The marker wizard allows you to configure
and activate up to 16 different markers in one dialog. The first 8 markers are displayed
on one tab, the last 8 markers on a second tab. For each marker, the following settings
are available:
"Selected/
State"
When you press the "Selected" or "State" field the corresponding
marker is activated and the marker row is highlighted.
"Normal/Delta"
Defines whether it is a normal marker or delta marker. For delta
markers you can define a reference marker.
"Ref. Marker"
Reference marker for delta markers. The marker values for the delta
marker are indicated relative to the specified reference marker.
The reference marker can either be another active marker, or a fixed
reference marker ("FXD", see "Ref Fixed" on page 290).
"Trace"
Trace for which the marker is to be set.
Measurement Functions
To Next Page
Loading...
