Rohde & Schwarz FSVA - Page 398

Instrument Functions
R&S
®
FSVA/FSV
398Operating Manual 1176.7510.02 ─ 09
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing on page 749
Display range:
DISP:WIND:TRAC:Y 10DB, see DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 749
Range Log 5 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 5 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing on page 749
Display range:
DISP:WIND:TRAC:Y 5DB, see DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 749
Range Log 1 dB ← x-Axis Range ← Scaling ← CCDF
Sets the level display range to 1 dB.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing on page 749
Display range:
DISP:WIND:TRAC:Y 1DB, see DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
on page 749
Range Log Manual ← x-Axis Range ← Scaling ← CCDF
Opens an edit dialog box to define the display range of a logarithmic level axis man-
ually.
Remote command:
Logarithmic scaling:
DISP:WIND:TRAC:Y:SPAC LOG, see DISPlay[:WINDow<n>]:TRACe<t>:Y:
SPACing on page 749
Display range:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe] on page 749
Range Linear % ← x-Axis Range ← Scaling ← CCDF
Selects linear scaling for the level axis in %.
The grid is divided into decadal sections.
Markers are displayed in the selected unit ("Unit" softkey). Delta markers are displayed
in % referenced to the voltage value at the position of marker 1. This is the default set-
ting for linear scaling.
Remote command:
DISP:TRAC:Y:SPAC LIN, see DISPlay[:WINDow<n>]:TRACe<t>:Y:SPACing
on page 749
Measurement Functions