Instrument Functions
R&S
®
FSVA/FSV
444Operating Manual 1176.7510.02 ─ 09
If the optional R&S DigIConf software is installed, the submenu consists only of one
key to access the software. Note that R&S DigIConf requires a USB connection
(not LAN!) from the R&S FSVA/FSV to the R&S EX-IQ-BOX in addition to the R&S
Digital I/Q Interface connection. R&S DigIConf version 2.10 or higher is required.
For typical applications of the R&S EX-IQ-BOX see also the description of the R&S
Digital I/Q Interface (R&S FSV-B17) in the base unit manual.
For details on configuration see the "R&S®Ex I/Q Box - External Signal Interface Mod-
ule Manual".
For details on installation and operation of the R&S DigIConf software, see the
"R&S®EX-IQ-BOX Digital Interface Module R&S®DigIConf Software Operating Man-
ual".
TX Settings ← EXIQ ← I/Q Analyzer
Opens the "EX-IQ-BOX Settings" dialog box to configure the R&S FSVA/FSV for digital
output to a connected device ("Transmitter" Type).
RX Settings ← EXIQ ← I/Q Analyzer
Opens the "EX-IQ-BOX Settings" dialog box to configure the R&S FSVA/FSV for digital
input from a connected device ("Receiver" Type).
Send To ← EXIQ ← I/Q Analyzer
The configuration settings defined in the dialog box are transferred to the R&S EX-IQ-
BOX.
Firmware Update ← EXIQ ← I/Q Analyzer
If a firmware update for the R&S EX-IQ-BOX is delivered with the R&S FSVA/FSV firm-
ware, this function is available. In this case, when you select the softkey, the firmware
update is performed.
R&S Support ← EXIQ ← I/Q Analyzer
Stores useful information for troubleshooting in case of errors.
This data is stored in the C:\R_S\Instr\user\Support directory on the instru-
ment.
If you contact the Rohde&Schwarz support to get help for a certain problem, send
these files to the support in order to identify and solve the problem faster.
DigIConf ← EXIQ ← I/Q Analyzer
Starts the optional R&S DigIConf application. This softkey is only available if the
optional software is installed.
To return to the R&S FSVA/FSV application, press any key on the front panel. The
application is displayed with the "EXIQ" menu, regardless of which key was pressed.
For details on the R&S DigIConf application, see the "R&S®EX-IQ-BOX Digital Inter-
face Module R&S®DigIConf Software Operating Manual".
Note: If you close the R&S DigIConf window using the "Close" icon, the window is
minimized, not closed.
Instrument Functions - I/Q Analyzer
To Next Page
Loading...
