Instrument Functions
R&S
®
FSVA/FSV
546Operating Manual 1176.7510.02 ─ 09
Remote command:
[SENSe:]PMETer<p>[:STATe] on page 834
Power Sensor Config
Opens the "Power Sensor Configuration" dialog box to configure up to 4 different
power sensors. Each sensor configuration is displayed on a separate tab. The serial
number of the power sensor connected to the instrument and currently assigned to the
displayed configuration is indicated on the tab.
Power Sensor Assignment
Opens the "Power Sensor Assignment" dialog box to assign the connected power sen-
sors to the configuration sets.
The detected serial numbers of the power sensors connected to the instrument are
provided in a selection list. For each of the four available power sensor indexes
("Power Sensor 1"..."Power Sensor 4"), which correspond to the tabs in the configura-
tion dialog, one of the detected serial numbers can be assigned. The physical sensor is
thus assigned to the configuration setting for the selected power sensor index.
By default, serial numbers not yet assigned are automatically assigned to the next free
power sensor index for which "Auto Assignment" is selected.
Alternatively, you can assign the sensors manually by deactivating the "Auto Assign-
ment" option and selecting a serial number from the list.
Remote command:
SYSTem:COMMunicate:RDEVice:PMETer<p>:DEFine on page 884
SYSTem:COMMunicate:RDEVice:PMETer<p>:CONFigure:AUTO[:STATe]
on page 885
SYSTem:COMMunicate:RDEVice:PMETer<p>:COUNt? on page 885
Continuous Value Update
If activated, the power sensor data is updated continuously even after a single sweep
has completed. For continuous sweeps this setting is irrelevant.
This function cannot be activated for individual sensors; if you change the setting for
one sensor, it is automatically applied to all sensors.
If the power sensor is being used as a trigger (see "Power Sensor" on page 270), con-
tinuous update is not possible; this setting is ignored.
Remote command:
[SENSe:]PMETer<p>:UPDate[:STATe] on page 841
Instrument Functions - Power Sensor (R&S
FSV-K9)
To Next Page
Loading...
